Front Side Member and Fender Apron Panel LH
Special Tool(s) / General Equipment
Resistance Spotwelding Equipment
Air Body Saw
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name | Specification |
|---|---|
Seam Sealer TA-2-B | - |
Removal
1. If required, dimensionally restore vehicle to pre-accident condition. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
2. Refer to: Fender Apron Panel Reinforcement (501-27 Front End Sheet Metal Repairs, Removal and Installation).
3. Remove the following items:
1. Refer to: Front Bumper (501-19 Bumpers, Removal and Installation).
2. Refer to: Front Subframe - 2.3L EcoBoost (201kW/273PS) (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation).
3. Refer to: Front Subframe - 3.7L Duratec (227kW/301PS)/5.0L 32V Ti-VCT/5.2L 32V Ti-VCT (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation).
4. Refer to: Radiator (303-03A Engine Cooling - 2.3L EcoBoost (231kW/314PS), Removal and Installation).
5. Refer to: Radiator (303-03B Engine Cooling - 3.7L Duratec (227kW/301PS), Removal and Installation).
6. Refer to: Radiator (303-03C Engine Cooling - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).
7. Refer to: Engine (303-01A Engine - 2.3L EcoBoost (231kW/314PS), Removal).
8. Refer to: Engine (303-01B Engine - 3.7L Duratec (227kW/301PS), Removal).
9. Refer to: Engine (303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal).
4. NOTE: LH side shown, RH similar.
NOTE: Individual apron panels can be serviced as required.
Overview
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.