3. If required, dimensionally restore vehicle to pre-accident condition. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
4. Remove the following items:
1. Refer to: A-Pillar Trim Panel - Coupe (501-05 Interior Trim and Ornamentation, Removal and Installation). Refer to: A-Pillar Trim Panel - Convertible (501-05 Interior Trim and Ornamentation, Removal and Installation).
2. Refer to: Fender (501-02 Front End Body Panels, Removal and Installation).
3. Refer to: Hood (501-02 Front End Body Panels, Removal and Installation).
4. Refer to: Front Door (501-03 Body Closures, Removal and Installation).
5. Refer to: Rocker Panel Moulding (501-08 Exterior Trim and Ornamentation, Removal and Installation).
6. NOTE: Coupe only.
Refer to: Roof Panel (501-28 Roof Sheet Metal Repairs, Removal and Installation).
5. Position the carpet and wiring harness away from the repair area
6. Remove the front door hinges at the A-pillar.
7. NOTE: Coupe shown, convertible similar.
Carefully cut the outer body panel only. Use the General Equipment: Air Body Saw
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.