Vehicle Dynamic Suspension
DTC Chart: Vehicle Dynamics Control Module (VDM)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
VDM DTC Chart
DTC | Description | Action |
|---|---|---|
B14C1:64 | Damper Temperature: Signal Plausibility Failure | GO to Pinpoint Test C |
C103E:00 | Suspension System Shipping Blocks Not Removed: No Sub Type Information | The vehicle is fitted with spacers designed to maintain a very high vehicle trim height in order to protect against front splitter or rear diffuser damage. If all 4 height sensors have been correctly configured and there are no height sensor Diagnostic Trouble Codes (DTCs) present, the VDM sets this DTC if there is no change in ride height information. REMOVE the shipping blocks from the front struts and rear shock absorbers. |
C110C:11 | Left Front Damper Solenoid: Circuit Shorted to Ground | GO to Pinpoint Test C |
C110C:12 | Left Front Damper Solenoid: Circuit Shorted to Battery | GO to Pinpoint Test C |
C110C:13 | Left Front Damper Solenoid: Circuit Open | GO to Pinpoint Test C |
C110C:19 | Left Front Damper Solenoid: Circuit Current Above Threshold | GO to Pinpoint Test C |
C110C:1A Left Front Damper Solenoid: Circuit Resistance Below Threshold | GO to Pinpoint Test C | |
C110C:1B Left Front Damper Solenoid: Circuit Resistance Above Threshold | GO to Pinpoint Test C | |
C110D:11 | Right Front Damper Solenoid: Circuit Shorted to Ground | GO to Pinpoint Test C |
C110D:12 | Right Front Damper Solenoid: Circuit Shorted to Battery | GO to Pinpoint Test C |
C110D:13 | Right Front Damper Solenoid: Circuit Open | GO to Pinpoint Test C |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.