DTC | Description | Action |
|---|---|---|
absorbers for signs of leakage or damage. INSTALL new components as necessary. | ||
C1124:55 | Height Sensor(s): Not Configured | This DTC is automatically set in a new VDM and indicates the system requires height sensor calibration. Once the system is calibrated, the DTC can be cleared. CALIBRATE the VDM and sensors. FOLLOW the diagnostic scan tool instructions. CLEAR the DTCs. REPEAT the VDM self-test. |
C1124:56 | Height Sensor(s): Invalid / Incompatible Configuration | This DTC is automatically set in a new VDM and indicates the system requires height sensor calibration. Once the system is calibrated, the DTC can be cleared. CALIBRATE the VDM and sensors. FOLLOW the diagnostic scan tool instructions. CLEAR the DTCs. REPEAT the VDM self-test. |
C1A03:12 | Left Front Height Sensor: Circuit Shorted to Battery | GO to Pinpoint Test D |
C1A03:14 | Left Front Height Sensor: Circuit Shorted to Ground or Open | GO to Pinpoint Test D |
C1A03:2A Left Front Height Sensor: Signal Stuck In Range | GO to Pinpoint Test D | |
C1A03:64 | Left Front Height Sensor: Signal Plausibility Failure | GO to Pinpoint Test D |
C1A04:12 | Right Front Height Sensor: Circuit Shorted to Battery | GO to Pinpoint Test D |
C1A04:14 | Right Front Height Sensor: Circuit Shorted to Ground or Open | GO to Pinpoint Test D |
C1A04:2A Right Front Height Sensor: Signal Stuck In Range | GO to Pinpoint Test D | |
C1A04:64 | Right Front Height Sensor: Signal Plausibility Failure | GO to Pinpoint Test D |
C1A05:12 | Left Rear Height Sensor: Circuit Shorted to Battery | GO to Pinpoint Test D |
C1A05:14 | Left Rear Height Sensor: Circuit Shorted to Ground or Open | GO to Pinpoint Test D |
C1A05:2A Left Rear Height Sensor: Signal Stuck In Range | GO to Pinpoint Test D | |
C1A05:64 | Left Rear Height Sensor: Signal Plausibility Failure | GO to Pinpoint Test D |
C1A06:12 | Right Rear Height Sensor: Circuit Shorted to Battery | GO to Pinpoint Test D |
C1A06:14 | Right Rear Height Sensor: Circuit Shorted to Ground or Open | GO to Pinpoint Test D |
C1A06:2A Right Rear Height Sensor: Signal Stuck In Range | GO to Pinpoint Test D | |
C1A06:64 | Right Rear Height Sensor: Signal Plausibility Failure | GO to Pinpoint Test D |
C1B14:16 | Sensor Supply Voltage A: Circuit Voltage Below Threshold | GO to Pinpoint Test D |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.