Vehicle Dynamic Suspension — 2016 workshop reference 2623

For the LH front height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C1733-1		C4585A-6
C1733-2		C4585A-21
C1733-3		C4585A-36

For the RH front height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C1151-1		C4585A-3
C1151-2		C4585A-18
C1151-3		C4585A-34

For the LH rear height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C4092-1		C4585A-17
C4092-2		C4585A-2
C4092-3		C4585A-33

For the RH rear height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C4093-1		C4585A-20
C4093-2		C4585A-5
C4093-3		C4585A-35

Are the resistance less than 3 ohms?

Yes	If DTC C1A0X:64 is present, GO to D4 If DTC C1A0X:14 or C1A0X:2A is present, GO to D5
No	For front height sensor concerns, INSPECT connectors C1733 and C1153 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). For rear height sensor concerns, INSPECT connectors C4092 and C4093 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s).

Yes

If DTC C1A0X:64 is present, GO to D4 If DTC C1A0X:14 or C1A0X:2A is present, GO to D5

For front height sensor concerns, INSPECT connectors C1733 and C1153 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). For rear height sensor concerns, INSPECT connectors C4092 and C4093 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s).

D4 CHECK THE HEIGHT SENSOR CIRCUITS FOR A SHORT TO VOLTAGE

Ignition OFF. Disconnect VDM C4585A (if not previously disconnected). Disconnect the suspect height sensor electrical connector(s) (if not previously disconnected).

Source reference 2623

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.