Vehicle Dynamic Suspension — 2016 workshop reference 2622

D2 CHECK THE HEIGHT SENSOR CIRCUITS FOR A SHORT TO GROUND

Ignition OFF. Disconnect VDM C4585A. Disconnect the suspect height sensor electrical connector(s). For the LH front height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C1733-1		Ground
C1733-2		Ground
C1733-3		Ground

For the RH front height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C1151-1		Ground
C1151-2		Ground
C1151-3		Ground

For the LH rear height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C4092-1		Ground
C4092-2		Ground
C4092-3		Ground

For the RH rear height sensor, measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C4093-1		Ground
C4093-2		Ground
C4093-3		Ground

Are the resistance greater than 10,000 ohms?

Yes	GO to D3
No	For front height sensor concerns, INSPECT connectors C1733 and C1153 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). For rear height sensor concerns, INSPECT connectors C4092 and C4093 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s).

Yes

GO to D3

For front height sensor concerns, INSPECT connectors C1733 and C1153 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). For rear height sensor concerns, INSPECT connectors C4092 and C4093 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s).

D3 CHECK THE HEIGHT SENSOR CIRCUITS FOR AN OPEN

Source reference 2622

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.