Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1733-1 | C1733-2 | |
C1733-1 | C1733-3 | |
C1733-2 | C1733-3 |
For the RH front height sensor, measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1151-1 | C1151-2 | |
C1151-1 | C1151-3 | |
C1151-2 | C1151-3 |
For the LH rear height sensor, measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4092-1 | C4092-2 | |
C4092-1 | C4092-3 | |
C4092-2 | C4092-3 |
For the RH rear height sensor, measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4093-1 | C4093-2 | |
C4093-1 | C4093-3 | |
C4093-2 | C4093-3 |
Are the resistances greater than 10,000 ohms?
Yes | INSTALL a new height sensor. REFER to: Front Suspension Height Sensor (204-05 Vehicle Dynamic Suspension, Removal and Installation). REFER to: Rear Suspension Height Sensor (204-05 Vehicle Dynamic Suspension, Removal and Installation). | |
|---|---|---|
No | For front height sensor concerns, INSPECT connectors C1733 and C1153 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). For rear height sensor concerns, INSPECT connectors C4092 and C4093 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). | |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.