Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1733-1 | Ground | |
C1733-2 | Ground | |
C1733-3 | Ground |
For the RH front height sensor, measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1151-1 | Ground | |
C1151-2 | Ground | |
C1151-3 | Ground |
For the LH rear height sensor, measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4092-1 | Ground | |
C4092-2 | Ground | |
C4092-3 | Ground |
For the RH rear height sensor, measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4093-1 | Ground | |
C4093-2 | Ground | |
C4093-3 | Ground |
Is any voltage present?
Yes | For front height sensor concerns, INSPECT connectors C1733 and C1153 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). For rear height sensor concerns, INSPECT connectors C4092 and C4093 for corrosion, pushed out pins, bent pins and spread terminals. REPAIR as necessary. If the connectors are OK, REPAIR the affected circuit(s). | |
|---|---|---|
No | GO to D5 | |
D5 CHECK THE HEIGHT SENSOR CIRCUITS FOR A SHORT TOGETHER
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.