Rear Halfshaft Seal

205-02 Rear Drive Axle/Differential 2016 Mustang

Removal and Installation Procedure revision date: 01/28/2015

Special Tool(s) / General Equipment

Rear Halfshaft Seal — original illustration 1, reference 2747Original colors & callouts · Select to enlarge	205-1013 Installer, Rear Axle pilot bearing TKIT-2014D-FL_ROW TKIT-2014D-ROW2
	205-504 Installer, Halfshaft Pilot Bearing TKIT-2002N-F/FM TKIT-2002N-FLM TKIT-2002N-LM
Rear Halfshaft Seal — original illustration 3, reference 2747Original colors & callouts · Select to enlarge	205-907 Handle, 32 Driver TKIT-2008DH-FLM
Rear Halfshaft Seal — original illustration 4, reference 2747Original colors & callouts · Select to enlarge	206-034 (T88P-20202-B) Installer, Wheel Speed Sensor Ring TKIT-1988-FLM TKIT-1988-LM
Rear Halfshaft Seal — original illustration 5, reference 2747Original colors & callouts · Select to enlarge	308-047 (T77F-1102-A) Remover, Bearing Cup
Slide Hammer

Rear Halfshaft Seal — original illustration 2, reference 2747Original colors & callouts · Select to enlarge

Removal

1. Remove the rear halfshafts. Refer to: Rear Halfshaft (205-05 Rear Drive Halfshafts, Removal and Installation).

2. Remove and discard the rear half halfshaft seal.

Source reference 2747

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.