DTC | Description | Action |
|---|---|---|
Codes (DTCs) in the CCM. REFER to: Cruise Control (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Diagnosis and Testing). If there are no Diagnostic Trouble Codes (DTCs) in the CCM, INSPECT the vehicle braking system for a dragging condition or another condition that may cause rapid vehicle deceleration. | ||
U2108:00 | Adaptive Cruise Control: No Sub Type Information | In order to detect errors in the CCM, the cruise control system is momentarily shut off during a driver braking event. This DTC sets when the ABS module detects cruise control system activation during a driver braking event. This is most likely caused by a network communication concern or an internal failure of the CCM. RETRIEVE and REPAIR all Diagnostic Trouble Codes (DTCs) in the CCM. REFER to: Cruise Control (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Diagnosis and Testing). |
U2108:68 | Adaptive Cruise Control: Event Information | The ABS module monitors vehicle deceleration during adaptive cruise control braking events to prevent an over-braking situation. This DTC sets when vehicle deceleration is greater than 3.2 meters per second 2 . This is most likely caused by an abrupt stop of the vehicle due to a collision, an extreme driving situation, a mechanical or electrical failure of the adaptive cruise control system or an internal failure of the ABS module. RETRIEVE and REPAIR all other ABS module Diagnostic Trouble Codes (DTCs) before diagnosing DTC U2108:68. If there are no other ABS module Diagnostic Trouble Codes (DTCs) present, RETRIEVE and REPAIR all Diagnostic Trouble Codes (DTCs) in the CCM. REFER to: Cruise Control (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Diagnosis and Testing). If there are no Diagnostic Trouble Codes (DTCs) in the CCM, INSPECT the vehicle braking system for a dragging condition or another condition that may cause rapid vehicle deceleration. |
U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | CHECK the service history for recent service actions related to the ABS module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with the ABS module, REPEAT the PMI procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new ABS module to correct the failure to retain the configuration data. REFER to: Anti-Lock Brake System (ABS) Module (206-09 Anti-Lock Brake System (ABS) and Stability Control, Removal and Installation). |
U3000:49 | Control Module: Internal Electronic Failure | CLEAR the Diagnostic Trouble Codes (DTCs). CARRY OUT the ABS module self-test. RETRIEVE and RECORD all Diagnostic Trouble Codes (DTCs). If the DTC returns INSTALL a new ABS module. REFER to: Anti-Lock Brake System (ABS) Module (206-09 Anti-Lock Brake System (ABS) and Stability Control, Removal and Installation). |
U3002:62 | Vehicle Identification Number: Signal Compare Failure | GO to Pinpoint Test N |
U3003:08 | Battery Voltage: Bus Signal / Message Failure |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.