20. NOTE: To remove the reverse shift fork and the reverse shift rail assembly, the transmission must be in neutral and the groves on the shift rail must be aligned with the interlock plate.
Remove the reverse shift fork and the reverse shift rail assembly.
Inspect the reverse shift fork and reverse shift rail assembly for wear or damage. Install new components as necessary.
21. Using the special tools, remove the shift shaft stop pin. Use Special Service Tool: 308-812 Remover, Detent. Use the General Equipment: Slide Hammer
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.