Steering Wheel Cover Repair

211-04 Steering Column 2016 Mustang

General Procedures Procedure revision date: 04/10/2012

Materials

Name	Specification
Instant Gel Adhesive TA-19	WSK-M2G402-A4

Activation

1. NOTE: If re-adhering leather to the front side of the steering wheel only, it will not be necessary to remove the steering wheel. Steering wheel removal is necessary only when repairing loose leather on the backside of the steering wheel.

If necessary, remove the steering wheel. Refer to: Steering Wheel (211-04 Steering Column, Removal and Installation).

2. Position the loose leather out of the way.

3. Apply the specified adhesive evenly over the wheel spoke. Material : Instant Gel Adhesive / TA-19 (WSK-M2G402-A4)

4. Position the loose leather back into the original position.

5. NOTE: The adhesive should be completely set after 5 minutes. Do not pull on the repair area.

Smooth the leather and tuck in for neat appearance.

6. Apply pressure (for at least 30 seconds) until the leather is bonded to the wheel spoke.

7. If removed, install the steering wheel. Refer to: Steering Wheel (211-04 Steering Column, Removal and Installation).

Source reference 3359

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.