Valve Cover LH
Special Tool(s) / General Equipment
205-142 (T80T-4000-J) Installer, Differential Bearing Cone | |
205-153 (T80T-4000-W) Handle | |
303-1247 VCT Spark Plug Tube Seal Remover and Installer TKIT-2006UF-FLM TKIT-2006UF-ROW | |
Plastic Scraper | |
Materials
Name | Specification |
|---|---|
Motorcraft® Silicone Gasket Remover ZC-30-A | - |
Motorcraft® Metal Surface Prep ZC-31-B | - |
Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.) | - |
Removal
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
1. Release the fuel system pressure. Refer to: Fuel System Pressure Release (310-00C Fuel System - General Information - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), General Procedures).
2. Disconnect the battery ground and positive cables. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
3. If equipped with a strut tower cross brace, detach the wiring harness retainer. Remove the nuts and the strut tower cross brace.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.