Driver side footwell air discharge temperature sensor
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2436-1 | C2436-2 |
Click to display connectors
Driver side register air discharge temperature sensor
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2438-1 | C2438-2 |
Is the voltage between 4.7 and 5.1 volts?
Yes | INSTALL a new air discharge temperature sensor. Refer to the appropriate section in Group 412 for the procedure. CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If Diagnostic Trouble Code (DTC) returns, GO to M9 | |
|---|---|---|
No | GO to M2 | |
M2 CHECK THE AIR DISCHARGE TEMPERATURE SENSOR SIGNAL CIRCUIT FOR A SHORT TO VOLTAGE
Disconnect FCIM C2402A. Disconnect FCIM C2402B. Measure:
Click to display connectors
Driver side footwell air discharge temperature sensor
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2436-1 | Ground |
Click to display connectors
Driver side register air discharge temperature sensor
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2438-2 | Ground |
Is any voltage present?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.