Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C233-2 | Ground | |
C233-3 | Ground | |
C233-4 | Ground | |
C233-5 | Ground | |
C233-6 | Ground |
Is any voltage present?
Yes | REPAIR the circuit. | |
|---|---|---|
No | GO to N2 | |
N2 CHECK THE IN-VEHICLE TEMPERATURE AND HUMIDITY SENSOR CIRCUITS FOR A SHORT TO GROUND
Connect FCIM C2402A. Ignition OFF. Disconnect FCIM C2402A. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C233-1 | Ground | |
C233-2 | Ground | |
C233-3 | Ground | |
C233-4 | Ground | |
C233-5 | Ground | |
C233-6 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to N3 | |
|---|---|---|
No | REPAIR the circuit. | |
N3 CHECK THE IN-VEHICLE TEMPERATURE AND HUMIDITY SENSOR CIRCUITS FOR AN OPEN
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C233-3 | C2402A-3 | |
C233-5 | C2402A-2 |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.