MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Engine

Valve Cover LH

303-01C Engine - 5.0L

2016 Mustang5.0LReference 356 / 6,619HTML edition
← Chapter contentsProcedure contents
Valve Cover LH — original illustration 1, reference 356Original colors & callouts · Select to enlarge

3. Install a new gasket.

Valve Cover LH — original illustration 2, reference 356Original colors & callouts · Select to enlarge

4. NOTICE: If the valve cover is not installed and the fasteners tightened within 5 minutes, the sealant

must be removed and the sealing area cleaned.

Apply an 8 mm (0.31 in) bead of silicone gasket and sealant to the engine front cover-to-cylinder head joints. Material : Silicone Gasket and Sealant / TA-30 (WSE-M4G323-A4)

Source reference 356

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.