PINPOINT TEST S : VOICE RECOGNITION IS INOPERATIVE OR DOES NOT OPERATE CORRECTLY, OR DURING A PHONE CALL, POOR QUALITY OR NO OUTGOING AUDIO IS HEARD ON THE OUTSIDE
DEVICE
S1 CHECK THE AUDIBLE PROMPT FUNCTIONALITY
Operate the audio system in AM/ FM mode. Operate the VOICE steering wheel switch and listen for the SYNC® audible prompt.
Does the SYNC® system produce an audible prompt correctly; indicating voice recognition mode has been entered?
Yes | GO to S3 |
|---|---|
No | GO to S2 |
S2 CHECK THE OPERATION OF THE RH (RIGHT-HAND) LOWER STEERING WHEEL SWITCHES
Operate the audio system in AM/ FM mode. Operate the VOLUME +/-, SEEK +/END CALL, SEEK-/SEND CALL/RECEIVE CALL, VOICE, and MUTE steering wheel switches.
Do the VOLUME +/-, SEEK +/END CALL, SEEK-/SEND CALL/RECEIVE CALL, VOICE, and MUTE steering wheel switches operate correctly?
Yes | GO to Pinpoint Test R |
|---|---|
No | GO to Pinpoint Test X |
S3 CHECK THE MICROPHONE CIRCUITS TO THE APIM (SYNC MODULE) FOR A SHORT TO VOLTAGE
Ignition OFF. Disconnect: APIM C2383. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2383-5 | Ground | |
C2383-6 | Ground | |
C2383-29 | Ground |
Is any voltage present?
Yes | REPAIR the circuit in question. |
|---|---|
No | GO to S4 |
S4 CHECK THE MICROPHONE CIRCUITS TO THE APIM (SYNC MODULE) FOR A SHORT TO GROUND
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.