No | INSTALL a new driver airbag. REFER to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation). |
|---|
Y7 CHECK THE STEERING WHEEL HARNESS FOR A SHORT TO GROUND
Connect: Inline C2606. Disconnect: Clockspring C218B. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2999-2 | Ground | |
C2999-3 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to Y8 | |
|---|---|---|
No | INSTALL a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation). | |
Y8 CHECK THE STEERING WHEEL HARNESS FOR AN OPEN
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2999-2 | C218B-14 | |
C2999-3 | C218B-16 |
Are the resistances less than 3 ohms?
Yes | GO to Y9 | |
|---|---|---|
No | INSTALL a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation). | |
Y9 CHECK THE STEERING WHEEL HARNESS FOR A SHORT TOGETHER
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2999-2 | C2999-3 |
Is the resistance greater than 10,000 ohms?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.