Do the PID values agree with the switch positions?
Yes | GO to Y13 |
|---|---|
No | • If one or more, but not all PID values are incorrect or always read one particular switch position, INSTALL a new RH upper steering wheel switch. REFER to: Steering Wheel Multifunction Switch (211-05 Steering Wheel and Column Electrical Components, Removal and Installation). • If all PID values are incorrect or always read one particular switch position, GO to Y2 |
Y2 CHECK FOR IPC (INSTRUMENT PANEL CLUSTER) DTC (DIAGNOSTIC TROUBLE CODE) U0212:00
Ignition ON. Using a diagnostic scan tool, clear the DTCs from the IPC. Ignition OFF. Ignition ON. Wait at least 10 seconds. Using a diagnostic scan tool, perform the IPC self-test.
Is DTC U0212:00 set in the IPC?
Yes | REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes) . See DTC Chart: IPC. |
|---|---|
No | GO to Y3 |
Y3 CHECK FOR VOLTAGE FROM THE SCCM (STEERING COLUMN CONTROL MODULE)
WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment.
Ignition OFF. Remove the driver airbag. REFER to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation). Disconnect: RH Upper Steering Wheel Switch C2999. Disconnect: LH Upper Steering Wheel Switch C2998. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2999-2 | C2999-3 |
Is approximately 5 volts present?
Yes | INSTALL a new RH upper steering wheel switch. REFER to: Steering Wheel Multifunction Switch (211-05 Steering Wheel and Column Electrical Components, Removal and Installation). |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.