Yes | GO to X6 |
|---|---|
No | INSTALL a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation). |
X6 CHECK THE STEERING WHEEL HARNESS FOR A SHORT TOGETHER
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2367-2 | C2367-3 | |
C2367-2 | C2367-4 | |
C2367-2 | C2367-5 | |
C2367-3 | C2367-4 | |
C2367-3 | C2367-5 | |
C2367-4 | C2367-5 |
Are the resistances greater than 10,000 ohms?
Yes | GO to X7 |
|---|---|
No | INSTALL a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation). |
X7 CHECK THE CLOCKSPRING FOR A SHORT TO GROUND
Connect: Clockspring C218B. Disconnect: Clockspring C218C. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2367-2 | Ground | |
C2367-3 | Ground | |
C2367-4 | Ground | |
C2367-5 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to X8 |
|---|---|
No | INSTALL a new clockspring. REFER to: Clockspring (501-20B Supplemental Restraint System, Removal and Installation). |
X8 CHECK THE CLOCKSPRING FOR AN OPEN
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.