MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Information and Entertainment Systems

F6 INSPECT THE OVERHEAD CONSOLE ANC (ACTIVE NOISE CONTROL) MICROPHONE

415-00B General Information -Vehicles With Touchscreen Display

2016 MustangReference 4,375 / 6,619HTML edition
← Chapter contents

Check the vehicle service history for recent service actions related to the overhead console, headliner, or ANC microphones.

Have there been recent service actions with the overhead console, headliner, or ANC microphones?

Yes

GO to F6

No

GO to F14

F6 INSPECT THE OVERHEAD CONSOLE ANC (ACTIVE NOISE CONTROL) MICROPHONE INSTALLATION

Gain access to the overhead console ANC microphone. REFER to: Active Noise Control Microphone (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Removal and Installation). Inspect the microphone for correct mounting.

The microphone is snapped into the mounting bezel. The microphone is seated properly.

Is the microphone mounted correctly?

Yes

GO to F7

No

INSTALL the ANC microphone correctly. REFER to: Active Noise Control Microphone (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Removal and Installation).

F7 INSPECT THE OVERHEAD CONSOLE ANC (ACTIVE NOISE CONTROL) MICROPHONE FOR DAMAGE

Inspect the microphone and microphone mounting bezel for damage.

Is any damage present?

Yes

REPLACE the microphone or overhead console as needed. REFER to: Active Noise Control Microphone (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Removal and Installation).

No

• For coupes, GO to F12

• For convertibles, GO to F8

F8 INSPECT THE LHF (LEFT-HAND FRONT) ANC (ACTIVE NOISE CONTROL) MICROPHONE INSTALLATION

Gain access to the LHF ANC microphone. REFER to: Active Noise Control Microphone (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Removal and Installation). Inspect the microphone for correct mounting.

The microphone is snapped into the mounting bezel. The microphone is seated properly. The microphone mounting bezel is properly glued to the headliner with no gaps between the headliner and all four corners of the microphone mounting bezel.

Is the microphone mounted correctly?

Yes

GO to F9

Source reference 4375

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.