Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
Turn signal lamp out status | GWM | Indicates that there is an outage of one of the rear turn signal lamps |
Body Control Module (BCMB) Network Input Messages
Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
Left turn lamp request | GWM | A command to activate/deactivate the LH rear turn indicator. |
Right turn lamp request | GWM | A command to activate/deactivate the RH rear turn indicator. |
GWM Network Input Messages
Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
Turn signal switch status | SCCM | Indicates the turn signal stalk position on the LH steering column multifunction switch (left/right lane change or turn signal on or off). |
Turn indication request | BCM | A command to activate/deactivate the exterior mirror turn indicator. |
Turn signal lamp out status | Body Control Module (BCMB) | Indicates that there is an outage of one of the rear turn signal lamps |
DDM and PDM Network Input Messages
Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
Turn indication request | GWM | A command to the DDM or PDM to activate/deactivate the exterior mirror turn indicator. |
Turn Signals
The SCCM monitors the LH steering column multifunction switch position. When the LH steering column multifunction switch is in the LH or RH TURN position, the SCCM sends a message over the HS-CAN2 to the GWM then the GWM sends the message to the BCM over the HS-CAN1 indicating a request for the LH or RH turn signal.
When the BCM receives a request for a turn signal, the BCM supplies on/off voltage to the front turn lamps and, if not equipped with a memory seat, the exterior mirrors or hood turn lamps, if equipped. The BCM sends the turn indicator command message over the HS-CAN1 to the GWM then the GWM sends the message to the MS-CAN to the Body Control Module (BCMB). When the Body Control Module (BCMB) receives the message, it supplies on/off voltage to the rear turn lamps.
For vehicles equipped with a memory seat, the BCM sends a turn indicator command message over the HS-CAN1 to the GWM then the GWM sends the message to the MS-CAN to the door modules for the exterior mirror turn lamps.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.