Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C520-3 | C520-7 |
Click to display connectors
RH Exterior Mirror Turn Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-3 | C626-7 |
For hood turn signal lamp, measure:
Click to display connectors
LH Hood Turn Signal Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1638-1 | C1638-2 |
Click to display connectors
RH Hood Turn Signal Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1684-1 | C1684-2 |
Does the voltage alternate from 0 to greater than 11 volts?
Yes | For exterior mirror turn lamp, INSTALL a new exterior mirror turn signal lamp. REFER to: Exterior Mirror (501-09 Rear View Mirrors, Removal and Installation). For hood turn signal lamp, INSTALL a new hood turn signal lamp. REFER to: Hood Turn Signal Indicator Lamp (417-01 Exterior Lighting, Removal and Installation). |
|---|---|
No | REPAIR the circuit. |
B13 CHECK THE EXTERIOR MIRROR TURN LAMP OR HOOD TURN SIGNAL LAMP SUPPLY CIRCUIT FOR A SHORT TO GROUND
Ignition OFF. Deactivate the hazard flasher lamp function. Disconnect: Without memory seat, BCM C2280E. Disconnect: With memory seat, DDM C501A (LH exterior mirror lamp). Disconnect: With memory seat, PDM C652A (RH exterior mirror lamp). For exterior mirror turn lamp, measure:
Click to display connectors
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.