Condition | Possible Sources | Actions |
|---|---|---|
An individual ambient lighting LED is inoperative/does not cycle through all color combinations | Refer to the Pinpoint Test | GO to Pinpoint Test J |
Pinpoint Tests
The Courtesy Lamps Do Not Illuminate With a Door Open
Refer to Wiring Diagrams Cell 117 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Interior Lighting - System Operation and Component Description (417-02 Interior Lighting, Description and Operation).
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|---|---|
B1175:01 Driver Door Ajar Switch: General Electrical Failure | An on-demand DTC that sets when the BCM detects a fault on the LH front door ajar circuit. | |
B1176:01 Passenger Door Ajar Switch: General Electrical Failure | An on-demand DTC that sets when the BCM detects a fault on the RH front door ajar circuit. |
Possible Sources
Wiring, terminals or connectors Door latch BCM
PINPOINT TEST A : THE COURTESY LAMPS DO NOT ILLUMINATE WITH A DOOR OPEN
A1 CHECK THE DOOR AJAR SWITCH OPERATION
Disconnect: suspect door latch.
Do the courtesy lamps illuminate?
Yes | INSTALL a new front door latch. REFER to: Front Door Latch (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). | |
|---|---|---|
No | GO to A2 | |
A2 CHECK THE DOOR AJAR SWITCH INPUT CIRCUIT FOR A SHORT TO GROUND
Disconnect: BCM C2280E. Measure:
Click to display connectors
LH Front Door Ajar Switch
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.