Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C907-1 | Ground |
Click to display connectors
RH Vanity Mirror Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C906-1 | Ground |
Is the voltage greater than 11 volts?
Yes | GO to E4 |
|---|---|
No | REPAIR the circuit. |
E4 CHECK THE VANITY MIRROR GROUND CIRCUIT FOR AN OPEN
Measure:
Click to display connectors
LH Vanity Mirror Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C907-1 | C907-2 |
Click to display connectors
RH Vanity Mirror Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C906-1 | C906-2 |
Is the voltage greater than 11 volts?
Yes | INSTALL a new sun visor for the lamp in question. |
|---|---|
No | REPAIR the circuit. |
E5 CHECK THE GLOVE COMPARTMENT LAMP VOLTAGE SUPPLY CIRCUIT FOR AN OPEN
Ignition OFF. Disconnect: Glove Compartment Lamp C254. Ignition ON. Measure:
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.