Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-3 | C251-11 |
Is the resistance between 108 and 132 ohms?
Yes | GO to AE7 |
|---|---|
No | GO to AE22 |
AE7 CHECK THE HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) CIRCUITS BETWEEN THE SCCM (STEERING COLUMN CONTROL MODULE) AND THE DLC (DATA LINK CONNECTOR) FOR AN OPEN
Disconnect: SCCM C226A. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C226A-3 | C251-3 | |
C226A-4 | C251-11 |
Are the resistances less than 3 ohms?
Yes | GO to AE28 |
|---|---|
No | REPAIR the circuit in question. |
AE8 CHECK THE HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (+) AND HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (-) CIRCUITS FOR A SHORT TOGETHER
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-3 | C251-11 |
Is the resistance less than 3 ohms?
Yes | GO to AE10 |
|---|---|
No | GO to AE9 |
AE9 CHECK THE HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (+) AND HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (-) CIRCUITS FOR AN OPEN
Source reference 5939
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.