Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-3 | C251-11 |
Is the resistance greater than 10,000 ohms?
Yes | REPAIR the DLC or REPAIR the circuit in question. |
|---|---|
No | A capacitor internal to a module can still be draining, causing irregular resistance readings. WAIT 5 minutes. REPEAT the pinpoint test. If the concern is still present, REPAIR the circuit. |
AE10 CHECK THE HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (+) AND HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (-) CIRCUITS FOR A SHORT TOGETHER WITH THE MODULES DISCONNECTED
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-3 | C251-11 |
Disconnect modules one at a time until the resistance is greater than 3 ohms.
ABS module C135 CCM C1582 HUD module C2395 OCSM C3043 PSCM C1463A RCM C310B SCCM C226A VDM C4396
Did the resistance change to greater than 3 ohms with one of the modules disconnected?
Yes | For the ABS module, GO to AE21 For the CCM, GO to AE23 For the HUD module, GO to AE24 For the OCSM, GO to AE26 For the PSCM, GO to AE25 For the RCM, GO to AE27 For the SCCM, GO to AE28 For the VDM, GO to AE29 |
|---|---|
No | REPAIR the circuits. |
AE11 CHECK THE HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (+) AND HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) (-) CIRCUITS FOR A SHORT TO GROUND WITH THE MODULES DISCONNECTED
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.