C3 CHECK THE CPP (CLUTCH PEDAL POSITION) TOP OF TRAVEL SWITCH GROUND CIRCUIT FOR AN OPEN
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2354-2 | Ground |
Ignition ON. Monitor the PCM CPP_TOP PID.
Does the PID value read YES?
Yes | REPAIR the ground circuit. |
|---|---|
No | GO to C4 |
C4 CHECK THE CPP (CLUTCH PEDAL POSITION) TOP OF TRAVEL SWITCH SIGNAL CIRCUIT FOR AN OPEN
Ignition OFF. Disconnect PCM C1551B (2.3L), C1381B (3.7L) or C175B (5.0L, 5.2L). Measure:
Click to display connectors
2.3L
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2354-2 | C1551B-6 |
Click to display connectors
3.7L
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2354-2 | C1381B-8 |
Click to display connectors
5.0L, 5.2L
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2354-2 | C175B-8 |
Is the resistance less than 3 ohms?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.