Cruise Control

U0158:00

Lost Communication With Head Up Display: No Sub Type Information

GO to Pinpoint Test N

U0212:00

Lost Communication With Steering Column Control Module: No Sub Type Information

GO to Pinpoint Test O

U0401:86

Invalid Data Received From ECM/PCM "A": Signal Invalid

RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the PCM. Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. If no Diagnostic Trouble Codes (DTCs) are present in the PCM, DIAGNOSE the observable symptom.

U0418:86

Invalid Data Received From Brake System Control Module: Signal Invalid

RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the ABS module. REFER to: Anti-Lock Brake System (ABS) and Stability Control (206-09 Anti-Lock Brake System (ABS) and Stability Control, Diagnosis and Testing). If no Diagnostic Trouble Codes (DTCs) are present in the ABS module, DIAGNOSE the observable symptom.

U0423:82

Invalid Data Recevied From Instrument Panel Cluster Control Module: Alive/Sequence Counter Incorrect/ Not Updated

GO to Pinpoint Test S

U0429:86

Invalid Data Received From Steering Column Control Module: Signal Invalid

RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the SCCM. REFER to: Steering Wheel and Column Electrical Components (211-05 Steering Wheel and Column Electrical Components, Diagnosis and Testing). If no Diagnostic Trouble Codes (DTCs) are present in the SCCM, DIAGNOSE the observable symptom.

U0452:86

Invalid Data Received From Restraints Control Module: Signal Invalid

RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the RCM. REFER to: Airbag Supplemental Restraint System (SRS) (501-20B Supplemental Restraint System, Diagnosis and Testing). If no Diagnostic Trouble Codes (DTCs) are present in the RCM, DIAGNOSE the observable symptom.

U2018:51

Control Module Software #3: Not Programmed

This DTC sets when the CCM configuration has not been completed. CARRY OUT the PMI (when the original module is not available) for the module in question as directed by the diagnostic scan tool. REFER to: Module Configuration (418-01 Module Configuration) .

U2100:00

Initial Configuration Not Complete: No Sub Type Information

This DTC sets when the CCM configuration has not been completed. CARRY OUT the PMI (when the original module is not available) for the module in question as directed by the diagnostic scan tool. REFER to: Module Configuration (418-01 Module Configuration) .

U2300:55

Central Configuration: Not Configured

This DTC sets when the CCM detects the BCM is not configured correctly. CARRY OUT the PMI procedure (when the original module is not available) for the module in question as directed by the diagnostic scan tool. REFER to: Module Configuration (418-01 Module Configuration) .

U2300:64

Central Configuration: Signal Plausibility Failure

This DTC sets when the CCM detects the BCM is not configured correctly. CARRY OUT the PMI procedure (when the original module is not available) for the module in question as directed by the diagnostic scan tool. REFER to: Module Configuration (418-01 Module Configuration) .