U2300:55 | Central Configuration: Not Configured | This DTC sets when the SODL or SODR do not detect the VIN information on the MS-CAN. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in all other modules. |
U3000:44 | Control Module: Data Memory Failure | CLEAR the SODL or SODR Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC U3000:44 returns, INSTALL a new SODL or SODR. REFER to: Side Obstacle Detection Control Module (419-04 Side and Rear Vision, Removal and Installation). |
U3000:45 | Control Module: Program Memory Failure | CLEAR the SODL or SODR Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC U3000:45 returns, INSTALL a new SODL or SODR. REFER to: Side Obstacle Detection Control Module (419-04 Side and Rear Vision, Removal and Installation). |
U3000:46 | Control Module: Calibration/Parameter Memory Failure | CLEAR the SODL or SODR Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC U3000:46 returns, INSTALL a new SODL or SODR. REFER to: Side Obstacle Detection Control Module (419-04 Side and Rear Vision, Removal and Installation). |
U3000:49 | Control Module: Internal Electronic Failure | CLEAR the SODL or SODR Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC U3000:49 returns, INSTALL a new SODL or SODR. REFER to: Side Obstacle Detection Control Module (419-04 Side and Rear Vision, Removal and Installation). |
U3002:62 | Vehicle Identification Number: Signal Compare Failure | This DTC sets when the VIN stored in the SODL or SODR does not match the VIN that is broadcast on the network. CHECK the vehicle service history for recent service actions related to this module. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration (418-01 Module Configuration) . If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to: Side Obstacle Detection Control Module (419-04 Side and Rear Vision, Removal and Installation). |
Symptom Chart(s)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Symptom Chart - Blind Spot Information System (BLIS®)
Condition | Possible Sources | Action |
A module does not respond to the diagnostic scan Fuse tool Communication REFER to: Communications
concern Network (418-00 Module Wiring, terminals Communications Network) . or connectors
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.