The Blind Spot Information System (BLIS®) is inoperative or does not function correctly | Refer to the Pinpoint Test | GO to Pinpoint Test A |
The Blind Spot Information System (BLIS®) has poor or inconsistent performance | Refer to the Pinpoint Test | GO to Pinpoint Test A |
The Blind Spot Information System (BLIS®) message center warnings are not displayed and the exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED does not illuminate | Refer to the Pinpoint Test | GO to Pinpoint Test A |
An exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED is always on | Refer to the Pinpoint Test | GO to Pinpoint Test C |
An exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED does not illuminate | Refer to the Pinpoint Test | GO to Pinpoint Test D |
The IPC message center displays a blocked sensor message | Refer to the Pinpoint Test | GO to Pinpoint Test E |
The Blind Spot Information System (BLIS®) cannot be turned off in the message center | Refer to the Pinpoint Test | GO to Pinpoint Test F |
Symptom Chart - Cross Traffic Alert (CTA)
Condition | Possible Sources | Action |
A module does not respond to the diagnostic scan tool | Fuse Communication concern Wiring, terminals or connectors Module | REFER to: Communications Network (418-00 Module Communications Network) . |
The Cross Traffic Alert (CTA) system is inoperative or does not function correctly | Refer to the Pinpoint Test | GO to Pinpoint Test B |
The Cross Traffic Alert (CTA) system has poor or inconsistent performance | Refer to the Pinpoint Test | GO to Pinpoint Test B |
The Cross Traffic Alert (CTA) system message center warnings are not displayed and the exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED does not illuminate | Refer to the Pinpoint Test | GO to Pinpoint Test B |
An exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED does not illuminate when the audio tone sounds for the Cross Traffic Alert (CTA) system | Refer to the Pinpoint Test | GO to Pinpoint Test B |
An exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED is always on | Refer to the Pinpoint Test | GO to Pinpoint Test C |
An exterior mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) LED does not illuminate | Refer to the Pinpoint Test | GO to Pinpoint Test D |
The IPC message center displays a blocked sensor message | Refer to the Pinpoint Test | GO to Pinpoint Test E |
The Cross Traffic Alert (CTA) system cannot be turned off in the message center | Refer to the Pinpoint Test | GO to Pinpoint Test F |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.