PINPOINT TEST C :
C1 VERIFY THE CUSTOMER CONCERN
Ignition ON. Verify there is an observable symptom present.
Is an observable symptom present?
Yes | GO to C2 |
|---|---|
No | The system is operating normally at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
C2 CHECK THE COMMUNICATION NETWORK
Using a diagnostic scan tool, perform a network test.
Does the FCIM module pass the network test?
Yes | GO to C3 |
|---|---|
No | REFER to: Communications Network (418-00 Module Communications Network, Diagnosis and Testing). |
C3 PERFORM FCIM (FRONT CONTROLS INTERFACE MODULE) MODULE SELF-TEST
Using a diagnostic scan tool, perform a FCIM module self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes | Without touchscreen, REFER to: Information and Entertainment System (415-00A Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC, Diagnosis and Testing). With touchscreen, REFER to: Information and Entertainment System (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Diagnosis and Testing). |
|---|---|
No | GO to C4 |
C4 CHECK THE BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, retrieve the BCM Diagnostic Trouble Codes (DTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes | REFER to: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). |
|---|---|
No | GO to C5 |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.