Headliner

501-05 Interior Trim and Ornamentation 2016 Mustang

Removal and Installation Procedure revision date: 04/23/2015

Base Part Number: 5451916

Materials

Name	Specification
3M™ Super-Fast Repair Adhesive 04747	-

Removal

NOTE: LHD shown, RHD similar.

1. NOTE: RH side shown, LH side similar.

On both sides. Remove the sun visors.

1. Remove the retainer cap.

2. Release the retainer.

3. Remove the sun visor.

4. If equipped. Disconnect the electrical connector.

Headliner — original illustration 1, reference 857Original colors & callouts · Select to enlarge

2. On both sides, remove the A-pillar trim panels. Refer to: A-Pillar Trim Panel - Coupe (501-05 Interior Trim and Ornamentation, Removal and Installation).

3. Detach the wire harness and electrical connector retainers and disconnect the electrical connector.

Source reference 857

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.