MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Rear View Mirrors

501-09 Rear View Mirrors

2016 MustangReference 920 / 6,619HTML edition
← Chapter contentsProcedure contents

C7 CHECK THE COMMON CIRCUIT FOR A SHORT TO GROUND AT THE LH (LEFT-HAND) EXTERIOR MIRROR

Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C520-2

Ground

Is the resistance greater than 10,000 ohms?

Yes

GO to C23

No

REPAIR the circuit.

C8 CHECK THE POSITION SENSOR CIRCUITS FOR A SHORT TO VOLTAGE AT THE LH (LEFT-HAND) EXTERIOR MIRROR

Ignition OFF. Disconnect: LH Exterior Mirror C520. Disconnect: DDM C501B. Ignition ON. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C520-12

Ground

C520-10

Ground

C520-9

Ground

C520-8

Ground

Is any voltage present?

Yes

REPAIR the affected circuit.

No

GO to C9

C9 CHECK THE POSITION SENSOR CIRCUITS FOR A SHORT TO GROUND AT THE LH (LEFT-HAND) EXTERIOR MIRROR

Ignition OFF. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C520-10

Ground

C520-9

Ground

C520-8

Ground

Source reference 920

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.