Yes | GO to C13 |
|---|---|
No | GO to C23 |
C13 CHECK THE DDM (DRIVER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS) WITH THE HORIZONTAL POSITION SENSOR FEEDBACK CIRCUIT SHORTED TO GROUND
Ignition OFF. Connect:
Click to display connectors
Lead 1 | Measurement / Action | Lead 2 |
|---|---|---|
C520-10 | C520-12 |
Ignition ON. Using a diagnostic scan tool, clear the DDM Diagnostic Trouble Codes (DTCs). Perform the DDM self-test.
Is DTC B1C14:11 present?
Yes | REMOVE the jumper wire. GO to C14 |
|---|---|
No | REMOVE the jumper wire. GO to C23 |
C14 CHECK THE DDM (DRIVER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS) WITH THE VERTICAL POSITION SENSOR FEEDBACK CIRCUIT SHORTED TO GROUND
Ignition OFF. Connect:
Click to display connectors
Lead 1 | Measurement / Action | Lead 2 |
|---|---|---|
C520-8 | C520-12 |
Ignition ON. Using a diagnostic scan tool, clear the DDM Diagnostic Trouble Codes (DTCs). Perform the DDM self-test.
Is DTC B1C13:11 present?
Yes | REMOVE the jumper wire. GO to C24 |
|---|---|
No | REMOVE the jumper wire. GO to C23 |
C15 CHECK FOR VOLTAGE TO THE HORIZONTAL MOTOR CIRCUIT AT THE LH (LEFT-HAND) EXTERIOR MIRROR
Ignition OFF. Disconnect: LH Exterior Mirror C520. Connect:
Click to display connectors
Lead 1 | Measurement / Action | Lead 2 |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.