Strap Wrench
Mounting Stand
Plastic Scraper
Hose Clamp Remover/Installer
Materials
Name | Specification |
Motorcraft® Silicone Gasket Remover ZC-30-A | - |
Motorcraft® Metal Surface Prep ZC-31-B | - |
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.) | - |
NOTE: Do not loosen or remove the crankshaft pulley bolt without first installing the special tools as instructed in this procedure. The crankshaft pulley and the crankshaft timing sprocket are not keyed to the crankshaft. The crankshaft, the crankshaft sprocket and the pulley are fitted together by friction, using diamond washers between the flange faces on each part. For that reason, the crankshaft sprocket is also unfastened if the pulley bolt is loosened. Before any repair requiring loosening or removal of the crankshaft pulley bolt, the crankshaft and camshafts must be locked in place by the special service tools, otherwise severe engine damage can occur.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material (including any material created while cleaning gasket surfaces) that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
6-Speed Automatic Transmission - 6R80
1. Install Special Service Tool: 303-103 (T74P-6375-A) Holding Tool, Flywheel.
Remove the bolts and the flexplate.
Discard the bolts.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.