8. After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure using a diagnostic scan tool.
REMOVAL AND INSTALLATION > CRANKSHAFT REAR SEAL
Special Tool(s) / General Equipment
Plastic Scraper
Materials
Name | Specification |
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.) | WSS-M2C945-A |
Motorcraft® High Performance Engine RTV Silicone TA-357 | WSE-M4G323-A6 |
Motorcraft® Silicone Gasket Remover ZC-30-A | - |
Motorcraft® Metal Surface Prep ZC-31-B | - |
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.) | - |
REMOVAL AND INSTALLATION > CRANKSHAFT REAR SEAL > REMOVAL
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
1. Remove the flexplate or flywheel. Refer to: Flexplate . Refer to: Flywheel .
2. Remove the crankshaft sensor ring and the engine-to-transmission spacer plate.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.