NOTE: Removal steps in this procedure may contain installation details.
NOTE: Clean all exhaust connections before reassembly.
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
2. Loosen the clamps, release the tab and slide the clamps back on the muffler. Separate the muffler and tailpipe from the catalytic converters.
Torque
: 35 lb.ft (48 Nm)
3.
1. Disconnect the HO2S electrical connector.
2. Remove and discard the nuts.
Torque
: 30 lb.ft (40 Nm)
Ford_Mustang_all_2015-2017.pdf · source reference 6077
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.