13. Repair any leaks as necessary.
14. Repeat the leak test until the system passes.
REMOVAL AND INSTALLATION > EVAPORATIVE EMISSION CANISTER > REMOVAL
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNING: Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNING: Always disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
NOTE: Removal steps in this procedure may contain installation details.
1. Position the vehicle on a hoist. Refer to: Jacking and Lifting - Overview .
2. Disconnect the negative battery cable. Refer to: Battery Disconnect and Connect .
3. Disconnect the EVAP canister electrical connector.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.