1. Remove and clean the Oberg 28 micron filter.
2. Install the filter.
3. Backflush the system for 5 minutes.
4. Remove and inspect the filter.
5. If debris/contamination is present on the filter, repeat step 9.
11. Follow the equipment instructions to purge the transmission fluid cooler tubes and transmission fluid cooler.
REMOVAL AND INSTALLATION > TRANSMISSION FLUID COOLER - 2.3L ECOBOOST
(231KW/314PS)
Special Tool(s) / General Equipment
307-695 Tool, Quick Disconnect TKIT-2012C-FL TKIT-2012C-ROW TKIT-2012C-ROW2
REMOVAL AND INSTALLATION > TRANSMISSION FLUID COOLER - 2.3L ECOBOOST
(231KW/314PS) > REMOVAL
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the transmission fluid cooler tube fittings secondary latches.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.