Yes | GO to AC21 |
|---|---|
No | Correctly INSTALL the backrest blower motor or INSTALL a new seat backrest foam pad. INSTALL the seat. GO to AC36 |
AC21 CHECK CUSHION BLOWER MOTOR CIRCUIT FOR A SHORT TO VOLTAGE
REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Position the passenger seat in the vehicle and connect the seat-to-floor connectors. Disconnect: Passenger Side Airbag In-line C219. Disconnect: SCME C3265A. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265A-B | Ground |
Is any voltage present?
Yes | REPAIR the circuit. GO to AC36 |
|---|---|
No | GO to AC22 |
AC22 CHECK CUSHION BLOWER MOTOR + CIRCUIT FOR A SHORT TO GROUND
REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265A-A | Ground |
Is the resistance greater than 10,000 ohms?
Yes | GO to AC23 |
|---|---|
No | REPAIR the circuit. GO to AC36 |
AC23 CHECK THE RESISTANCE OF THE CUSHION BLOWER MOTOR AND WIRING
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265A-A | C3265A-B |
Is the resistance between 0.9 and 10 ohms?
Yes | GO to AC25 |
|---|---|
No | GO to AC24 |
AC24 CHECK THE CUSHION BLOWER MOTOR RESISTANCE
Disconnect: Passenger Seat Cushion Blower Motor C3040. Measure the component side resistance between:
Positive Lead | Measurement / Action | Negative Lead |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.