Front Seat Cushion Cover — 2016 workshop reference 1162

Front Seat Cushion Cover — original illustration 1, reference 1162Original colors & callouts · Select to enlarge

14. NOTE: Note the location of the OCS hose as it passes through the seat springs for proper installation.

Route out the OCS hose and sensor from between the seat cushion support wires and remove the seat cushion cover, foam and OCS sensor as an assembly.

Front Seat Cushion Cover — original illustration 2, reference 1162Original colors & callouts · Select to enlarge

All seats

15. NOTE: This step is only necessary when installing a new component.

Position the rear portion of the seat cushion cover from the foam.

Source reference 1162

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.