Description | Action | |||
|---|---|---|---|---|
DTC | ||||
C0061:68 | Lateral Acceleration Sensor: Event Information | REFER to: Pinpoint Test - DTC: AC (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
C0062:68 | Longitudinal Acceleration Sensor: Event Information | REFER to: Pinpoint Test - DTC: AC (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
C0063:68 | Yaw Rate Sensor: Event Information | REFER to: Pinpoint Test - DTC: AC (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
C0064:68 | Roll Rate Sensor: Event Information | REFER to: Pinpoint Test - DTC: AC (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
C0065:68 | Vertical Acceleration Sensor: Event Information | REFER to: Pinpoint Test - DTC: AC (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
U0100:00 | Lost Communication with ECM/PCM A: No Sub Type Information | REFER to: Pinpoint Test - DTC: AD (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
U0140:00 | Lost Communication with Body Control Module: No Sub Type Information | REFER to: Pinpoint Test - DTC: AE (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
U0154:00 | Lost Communication with Restraints Occupation Classification System Module: No Sub Type Information | REFER to: Pinpoint Test - DTC: AF (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
U0155:00 | Lost Communication with Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | REFER to: Pinpoint Test - DTC: AG (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | REFER to: Pinpoint Test - DTC: AH (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | CARRY OUT PMI. RETRIEVE RCM Diagnostic Trouble Codes (DTCs). If RCM DTC U0300:00 is retrieved on-demand during self-test, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). | ||
U0401:00 | Invalid Data Received From ECM/PCM A: No Sub Type Information | NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and PCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. To diagnose PCM Diagnostic Trouble Codes (DTCs), Refer to the appropriate section in Group 303 for the procedure. | ||
U0422:00 Invalid Data Received NOTE: This DTC sets in a module that is reporting a missing or invalid
From Body Control message from another module on the data bus. The module that reports Module: No Sub Type the fault is not the problem module. Do not install a new RCM as part of Information the repair unless directed to do so in a pinpoint test.
CHECK for additional RCM and BCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.