Description | Action | |||
|---|---|---|---|---|
DTC | ||||
U3003:17 | Battery Voltage: Circuit | Voltage Above Threshold REFER to: Pinpoint Test - DTC: AJ (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
DTC Chart: Occupant Classification System Module (OCSM)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
OCSM DTC Chart
Description | Action | |||
|---|---|---|---|---|
DTC | ||||
B0061:11 | Passenger Seatbelt Tension Sensor: Circuit Short To Ground | REFER to: Pinpoint Test - DTC: AK (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
B0061:12 | Passenger Seatbelt Tension Sensor: Circuit Short To Battery | REFER to: Pinpoint Test - DTC: AK (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
B0061:13 | Passenger Seatbelt Tension Sensor: Circuit Open | REFER to: Pinpoint Test - DTC: AK (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
B0061:49 | Passenger Seatbelt Tension Sensor: Internal Electronic Failure | REFER to: Pinpoint Test - DTC: AK (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
B0061:64 | Passenger Seatbelt Tension Sensor: Signal Plausibility Failure | REFER to: Pinpoint Test - DTC: AK (501-20B Supplemental Restraint System, Diagnosis and Testing). | ||
B00C0:11 | Passenger Seat Occupant Classification Sensor "A": Circuit Short to Ground | INSPECT the OCS for any damage and for correct installation. If damage is found, REPAIR the root cause of the damage and INSTALL a new OCS, as necessary. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). If any installation concerns are found, CORRECT the OCS installation, referring to the OCS Removal and Installation procedure as needed to make sure the sensor hose is free from kinks and correctly routed. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). If no damage or installation concerns are found, INSTALL a new OCS. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). | ||
B00C0:12 | Passenger Seat Occupant Classification Sensor "A": Circuit Short to Battery | INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). | ||
B00C0:16 Passenger Seat INSTALL a new OCS sensor.
Occupant Classification REFER to: Occupant Classification System (OCS) Sensor (501-20B Sensor "A": Circuit Supplemental Restraint System, Removal and Installation).
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.