Cylinder Head RH — 2016 workshop reference 197

Cylinder Head RH — original illustration 1, reference 197Original colors & callouts · Select to enlarge

2. NOTE: The cylinder head bolts are torque-to-yield and must not be reused. New cylinder head bolts must be installed.

Install the cylinder head and the new bolts. Torque : Stage 1: 18 lb.ft (25 Nm) Stage 2: 55 lb.ft (75 Nm) Stage 3: Loosen: 180° Stage 4: 18 lb.ft (25 Nm) Stage 5: 26 lb.ft (35 Nm) Stage 6: 90° Stage 7: 90°

Cylinder Head RH — original illustration 2, reference 197Original colors & callouts · Select to enlarge

3. Connect the heater hose.

Source reference 197

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.