Fender Apron Panel Reinforcement

501-27 Front End Sheet Metal Repairs 2016 Mustang

Removal and Installation Procedure revision date: 01/12/2015

Special Tool(s) / General Equipment

Resistance Spotwelding Equipment

Grinder

MIG/MAG Welding Equipment

Spot Weld Drill Bit

Locking Pliers

Materials

Name	Specification
Seam Sealer TA-2-B	-

Removal

1. Remove the following items:

1. Refer to: Hood (501-02 Front End Body Panels, Removal and Installation).

2. Refer to: Fender (501-02 Front End Body Panels, Removal and Installation).

3. Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).

2. RH side. Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation).

3. If required, dimensionally restore vehicle to pre-accident condition. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).

4. NOTE: LH side shown, RH similar.

Drill out the spot welds from upper fender apron reinforcement. Use the General Equipment: Spot Weld Drill Bit Use the General Equipment: Grinder

Source reference 2240

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.