Lower Arm Vertical Link

204-02 Rear Suspension 2016 Mustang

Removal and Installation Procedure revision date: 01/13/2015

Special Tool(s) / General Equipment

Vehicle/Axle Stands

Removal

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

1. Remove the wheel and tire. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).

2. Support the suspension at curb height. Use the General Equipment: Vehicle/Axle Stands

Lower Arm Vertical Link — original illustration 1, reference 2505Original colors & callouts · Select to enlarge

3. Remove and discard the 2 lower arm vertical link bolts and remove the lower arm vertical link.

Source reference 2505

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.