Rear Shock Absorber

204-02 Rear Suspension 2016 Mustang

Removal and Installation Procedure revision date: 08/6/2015

Base Part Number: 18080

Special Tool(s) / General Equipment

Vehicle/Axle Stands

Removal

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

1. Remove the wheel and tire. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).

2. Support the rear suspension. Use the General Equipment: Vehicle/Axle Stands

Rear Shock Absorber — original illustration 1, reference 2508Original colors & callouts · Select to enlarge

3. NOTE: If equipped with dynamic suspension.

Disconnect the rear shock absorber electrical connector.

Source reference 2508

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.