Brake Pads - Vehicles With: SVT Performance Package
Base Part Number: 2001
Removal
NOTICE: Do not pry in the caliper sight hole to retract the pistons as this can damage the pistons and boots.
NOTICE: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the wheel and tire. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
2. Remove and discard the upper brake caliper bolt. Torque : 136 lb.ft (185 Nm)
3. Loosely install a larger bolt (M14 x 180) turning 7 full turns.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.