9. NOTICE: When removing the bearing, do not over expand the bearing cage or damage to the
bearing cage can occur.
Remove the 4th gear needle bearing.
Inspect the 4th gear needle bearing for wear or damage. Install a new needle bearing as necessary.
10. Inspect the countershaft for scoring or worn or damaged splines. Install a new countershaft as necessary.
ASSEMBLY
NOTICE: Lubricate all components with the recommended transmission fluid before assembling.
1. NOTICE: When installing the bearing, do not over expand the bearing cage or damage to the
bearing cage can occur.
Install the 4th gear needle bearing. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.